通過利用噴（拋）丸對金屬表面進行處理從而達到強化、清理的工藝正越來越被人們重視，此工藝的推廣與應用給機械與設備的制造帶來了新的工業開始。噴（拋）丸設備、工藝、噴（拋）丸材料是決定一個工藝成敗的三個關鍵要素。
賽普金屬制品有限公司是一家專業從事高端噴（拋）丸的研發、生產與銷售，公司技術力量雄厚，有國內外多名專家作技術支持。產品包括了金屬類(強化鋼丸、不銹鋼丸、銅丸、鋁丸)與非金屬類（陶瓷丸）的多種高端磨料，產品符合國外多種標準，SAE J441，VDFI8001,AMS2431,MIL-C-13165等，同時也可為客戶訂制各種非標的金屬磨料。產品廣泛應用于各種承受交變載荷的機械零部件的強化、各種壓鑄件、鑄造件的表面去毛刺與飛邊、各種金屬及非金屬表面的處理。
There are numerous applications of cut wires shot to "clean" metallic pieces :
· in foundries, for the de-sanding and cleaning of pieces,
· in the steel industry for the de-scaling of sheet metal, billets, profiles...
· in metal construction, for the preparation of surfaces before painting or metallisation.
· shot peening, or prestressed abrasives, the shot demonstrates more efficiency and innovation again.
Indeed, this process strengthens the subject pieces (springs or gear-boxes) considerably as they are subjected to an intense fatigue, and gives a good cost/performance ratio !
What are the advantages of cut wire shot abrasives ?
Abrasives have made great advances in surface treatment :
· Cleanliness - Environment :
Shot blasting is a mechanical process carried out in an enclosed place so it does not generate any risk of environmental pollution. The abrasive is used several times as it is recycled. · Simplicity and mastery of the process :
It works in a very simple way and is therefore quickly in use: the implementation can start as soon as the hose is connected. Technically the projection controls itself easily. Once the parameters of the operation (speed, angle of projection, time of shot blasting...) are defined, the reproducibility is perfect.
· Security :
Shot Blasting is practically an operation without risk to the operators and presents no danger to the environment.
· Cost efficiency
Economic, shot blasting combines efficiency with cost control. Thanks to a good assessment of requirement and how to implement, the result obtained is without surprise. The surface preparation is uniform on the whole piece from the first treatment, thus avoidin g waste and loss of time.
· The cleaning of metallic pieces and their surface preparation prior to coating or for appearance.The pieces are blasted with steel abrasives in machines that are especially designed for this propose.
· Granite cutting into fine slices : grit particles are used as it were as gangsaw teeth
· The enhanced performance,by work hardening, of pieces working under fatigue (springs, gears ...)
performance , by work hardening, of pieces working under fatigue (springs, gears...) Ballast
